2 Dec 2022

Updating the saga of the damaged front bumper on the car, the one that was further damaged as per a few posts back.

Finally managed to get the front bumper off again and this time completely stripped apart, not a hard job, but one I put off because I am just too lazy. Anyway things are a lot worse that I had imagined with the spring bar that provides the rebound should the car be in an accident. Yes I know it certainly isn't a crumple zone design on this car. The bar is out of whack in just about every plane you could measure/test it by. Both ends are twisted in different directions and the symmetry of the bars design in completely out as one side had obviously had a fair hit at some time. I think it is well past saving and will need a replacement, which will hopefully twist the valance and the chrome dress bar back into shape, they both seem to be fairly much in the correct shape when it is all apart anyway.

A well skilled friend in Canberra is going to do some welding for me and hopefully we will replace either one or both of the bumper mount bars that hold the bar to the car. One of the ones on the car had lost its threaded section when I first got the car and a bolt was then welded to the stub that was left, which has worked well enough, though doesn't look too pretty. the other bar is now loose at the front and the threaded section now has a distinct bend upwards, which is a direct result of the parking speed "nudge". 

  Both halves of the bar should look like the right hand half in the pic

The bolt welded to the original stub, note the washers packing out the spacing 

The mount thread post the parking 'nudge", should be straight 

30 Nov 2022

Perhaps it was the impending St Andrew's day that was motivation for finally completing the upholstery of the passenger seat, though I would have actually had to remember that it was St Andrew's day (which I didn't), but finally it is done and for the time being that is it with upholstery.

The old Bluebird sewing machine had given up the ghost, so it is moving on to a new home in a museum (no, really, it is going to a museum!) and a new quite inexpensive Elna machine had no problem stitching it all together. Yah!

 I know they are not both the same. I was originally going to go for just an insert look with wings of the original upholstery  as per the base of the drivers seat, though that was somewhat too ambitious for my limited ability and a whole face replacement was much more my speed. Maybe one day I'll change the base of the drivers seat as well, certainly have enough cloth to do it, though for now I am happy for it to stay as it is.

27 Nov 2022

Spent a substantial amount of time this morning doing a grease and oil change, oh and changing the tappet case cover gaskets. Took a lot longer that had imagined it would, though well worth doing and happy with most of the results. one of the tappet cover gaskets unfortunately decided that it wanted to not quite seal and is allowing oil past, so now needs to be replaced yet again. Would probably be an easier job if the manifold was removed, though I haven't done that and it is quite a bit more fiddly, oh well, try again.

I decided to go for a drive and see how it went, hoping the gasket would seal after all, it didn't. I had seen a picture taken by someone else in the small town of Dean, Victoria some years ago and so decided to go and see if I could get a pic of the car there as well. Took a circuit route and went to Dean, Daylesford, Maldon and Castlemaine and the back to Melbourne. 

And the pic...

25 Nov 2022

 Today was a bit of a slow start to the morning as I wasn't really in a hurry to get to my last day of work, would have been happy not to go at all to be honest.

Anyway as I wasn't in a hurry and I had the car so thought I'd take a few pics along the way and see if I could get something decent. Some weren't too bad...

  

22 Oct 2022

 Don't you hate it when...

Headed out to the car today to head off somewhere and first thing I notice is that some swine has done a parking speed brush past on the front of the car. Well to be honest I actually noticed that, even though the bumper has always drooped on the drivers side of the car, it was hanging much lower that it ever had before.

You get that kind of thing when you park in the street I guess, it isn't the first, someone did a parking speed slight touch of the back once before. Cars around in the busier road have even been completely written off while parked out front of their owners houses on a regular basis. Makes it no less annoying though especially when the perpetrator would definitely know they have hit the car, but they can't be bothered owning up to it and leaving a note.

I have to say, I reckon I know exactly who did it, actually both times, though I can't prove anything. Maybe it is time for a dash cam, one that can record bumps while parked...

14 Aug 2022

 Another run with the BMC-Leyland club, up Mt Macedon and then through to Trentham for lunch at the pig and Whistle pub, and the Count didn't miss a beat. Actually it really liked the colder weather, always seems to, especially if there is a bit of moisture in the air, makes it run very well. The run went well and i wasn't always the slowest car on the trip, though I think everyone passed me on the way home, even those who had previously been slower. The only difficulties on the trip were posed by cars in front slowing down before the climb on the steeper sections of Mt Macedon, which then killed my momentum and thus when they started pulling away again I had nothing left to accelerate. Oh well, it is only 948cc after all. 

26 Jul 2022

 Just a quick run down the street today, only because of the threat of yet more rain, so too lazy to walk.

Not often that the street in front of this house is clear, so too the chance and parked up. Not too often you get the change to park in front of a house for sale at near $4 million AUD! Think it would be right at home in the garage...